China Best Dongfeng 10wheels 16Cbm Vacuum Trucks

  • China
  • Shanghai, Shenzhen,Qingdao
  • Color is optional
  • 15 working days
  • TT,LC,DP
  • Overview
  • Features
  • Specifications

New 12CBM LHD Dongfeng Vacuum Trucks are welcomed by clients because of it has following reasons:
1: Reliable quality
The truck is produced by our factory which follow ISO standard strictly and got ISO certification; each production process listed and material using in specification we follow strictly; All trucks’ assemble parts are produced in our workshops and we never place assemble parts order to small and private workshops; All chassis we used are from original ISUZU Chassis Company; SGS tested the Best 10wheels DFL Sewer Trucks before delivery to client’s destination port.

2: Advanced function
Notice of purchase of trucks
1: Note that the quality of plates
2: Vacuum tightness
3: Poor material likely to cause deformation of the tank and other issues
4:Domestic Weilong pump has reliable bearing
5: Tailgate will be chosen according to environment, temperature and other options

3: Noting of operation
A: Do not suck impurities such as more than 50mm stone, cotton yarn and leaves which will clog the straw
B: Keep straw clear often
C: When reading on vacuum gauge reach to 65-80 Kpa, extend sewage suction valve completely because it will damage heart valves when vacuum gauge in semi-open state
D: Straw shall be moved often when sludge sucked. While sucking high viscosity sludge, air and water shall be inhaled occasionally this can improve efficiency of Dongfeng 10wheels 18CBM Sewer Trucks.

4: Noting of discharge
A: appropriate pump revolution shall be maintain because if pump speed is too high, then the heat intensified will rotor, otherwise, the engine will knock which cause additional impact to parts to influence life. So adjust the throttle to suitable place which will keep vacuum pump use much longer.
B: It is prohibited that truck lift and dump at tilt road. Because it will cause truck whole weight to tilt to one place to produces distortion components. It can cause accidents. Turn the tank on LHD Dongfeng Euro3 Sewer Trucks on even ground.
3: Noting of turning sewer tank
A: Rear door of sewer tank shall be open before turn tank. Do not turn tank with rear door closed because there has risk of rollovers when truck gravity moved rear point.
B: Engine idling and fully press clutch down when separate oil pump PTO and vacuum pump PTO.
C: Joystick of PTO shall be in middle position when truck drives.
D: Do not use the truck to suck and transport oil and hazardous materials.
E: Support rods and safety stoppers shall be used when the sludge tank of rose to repair.
F: Clamping device on rear door of RHD Dongfeng 10wheels Vac Trucks shall be locked tightly when transport. The truck shall drive at slow or medium speed because there has not anti wave plate inside tank. It also cannot turn sharply and brake heavily.

Previous :New China ISUZU 700P 5CBM Vacuum Trucks

Next :New China 2Cbm ISUZU Vacuum Trucks

ASL Automobile Group Limited

Tel: +86 156 0866 6906

Fax:+86 186 7222 8987

Mobile:+86 156 0866 6906

Send your inquiry directly to us Email:

(0 / 3000)

Related Products+more